Being a fireman and a rope geek, the topic of emergency escape and belaying is a big one to me. So I’d like to share with you this video that was found, through rigorous searching of the internet, covering just those topics.
Should you be interested in the device (doubtful), the name of the company is shown later in the video.
These two videos were posted previously, but the links have gone bad. So here they are again for you to see how things can go REALLY wrong if you don’t know what the heck you’re doing. Both are from Peru. Just so it’s out there again: If you are visiting Peru and they ask if you want to ride a highline, it’s probably in your best interest to politely decline.
Check out this article from Las Vegas. It’s about the new 550′ Ferris wheel that can hold over 1100 people and the article highlights some of the planning that went in to possible rescue situations.
Kudos to the Las Vegas FD tech rescue team for being proactive in the situation. It looks like, should something ever happen, that it will be a complex mix of lead climbing, aid climbing, and some team based lowering. The fact that the fire dept. was consulted at all during construction is pretty neat too. Anchors were placed inside each pod so that a system could be hooked up and 3 victims at a time can be lowered.
Thanks to my sister, Caity, for pointing this one out to us. It’s not rescue stuff, but be sure to check out her awesome website spiralspiritballooncompany.com. Lots of great sculptures there!
Here are two great videos from DRR Rescue posted on youtube that show how to construct a 1-1-1 picket system, which is three pickets placed in a row.
Two things stood out to me in these videos. First, I really like the system they used to tie the pickets together. I’ve seen a few different variations on the technique, most involving some sort of windlass to tighten the webbing. Doing that requires more hardware, as well as driving in another piece of rebar. The videos show what amounts to a non working 3:1 with webbing.
The second thing that really stood out was how much force this system was able to hold. They put over 6ooo lbs of force on the system. While the picket did flex a little bit, it did not noticeably pull forward in the ground. I’m anxious to try this in the rain soaked, clay dirt around my house!
Thanks again to DRR for sharing these with the world. Be sure to check out the tutorial section on the website as well as their field guide, that thing is full of great, easy to apply info. http://www.desertrescue.com
There is a lot to be said for how far technology has allowed us to go in the world of ropes as it relates to safety: Stronger yet smaller ropes, lightweight high strength aluminum hardware, etc… But is fun to cast our thoughts back to where the rope rescue world has ascended (that’s a pun) from. Check out the rescue drama in the youtube video below. It is from 1949 and was posted by Ron Holan on the Rope Access Technicians Network group on Facebook.
The neat part about this for me was that they didn’t use any carbiners or friction devices to lower the casualty. It was all done with friction wraps around their bodies and around rock outcrops. While this might not be how a rescue should be done now, given all of our available equipment, it is none the less a look at how a rescue can be done without any equipment.
Maybe you could use this video as an idea for a drill: Only use a Stokes basket and a rope, no hardware, to accomplish lowering a package down a building, catwalk, mountain, etc… Oh, and they weren’t using Prusiks either. They only had trust in each other!
Also pretty darn old school is this picture of Silver Spring VFD using the ladder truck for a high directional to get a Stokes basket off of the roof of a one story school and down to the ground. Thanks to our Florida friend Joe Schulman for findiong and sharing this one.
It’s hard to tell for sure from the picture, but it looks like the rope is just hard tied to the tip and the ladder is just craning the load. Similar to one of our previous posts HERE , it’s also another example of how it might be easy to access a patient via ladder and use a rope system to get them down.
We have just added an Open Enrollment Class for our Modern Technologies in Rope Rescue workshop on May 17 and 18 in Lancaster, PA.This class covers a lot of ground in two days. We will discuss and use the AZTEK in many of its essential uses. We’ll also be using the Two Tension Rope System concept with the CMC MPD. Additionally, we’ll be using the Arizona Vortex in some of its traditional configurations as well as the Rescue 2 Training original: the “Appalachian Doortex” configuration for urban anchoring and elevator rescue.
Come out and try the newest equipment and techniques in rope rescue. Cost of the class is $295.
Email Kelly M Byrne at kelly@rescue2training.com or call 240-462-6610 for more information.
The recent rescue by the South Walton Fire District’s Technical Rescue team in Florida is a great example of rescue where it is easy to access the victim by something as simple as a ladder, but where a rope based system might still be the best alternative for getting them down to the ground safely.
You can see in the pictures that the guys on the ground are able to guide the basket most of the way to the ground while it is supported on the ladder and being lowered with rope.
Two quick points: If possible, I would have tried to line up my ladder with my anchors so that it was all in plumb. Maybe there is a good reason they didn’t. It’s hard to tell from just a picture. Secondly, you can see how easily they overcame this by just having a rescuer on the roof do a very minor deflection by just pulling on the rope. It’s a good example of knowing how to easily overcome a problem by knowing a few physics tricks.
Not all rope calls are high pucker factor incidents of life and death. Sometimes it’s just the simplest way of getting the patient to the ground. Good job, guys.
We were messing around the other day with some variations on how to better perform the best way to get a vertically oriented basket up over a 90 degree edge, which is know alternately as the “Pike and Pivot” or “V Strap” technique.
The issue of effective, efficient edge protection for our ropes and webbing was given us a bit of a challenge until our resident old man (and connoisseur of Miller Lite on his days off) , Mike S, suggested that we try and use a Sked as edge protection. It’s smooth, tough, has plenty of places to tie it off, and is much wider than standard edge protection. We’ve dubbed it Skedge Protection.
It can only be described as having worked perfectly for this situation.
I have no idea what the long term durability would be if used as edge pro all of the time, but for what we were using it for, I’ll definitely grab it without a second thought next time.
Here is a comparison of rescues performed at different speeds. The first one is an actual rescue from down in Florida of a worker who was suspended in his fall arrest harness after the scaffolding he was on collapsed. The word from our sources who were on the scene informed us that it took 1.5 hours to perform this pickoff rescue. I was not personally there and can not speak first hand of the details, but I am told that it was a pretty straight forward scenario that just took a very long time to accomplish.
The good news is that it was successful, but had the victim been in distress, it might have been a different outcome. A pickoff should be one of the bread and butter operations of every rope team. On the scene is not the time to figure out where your attachments go to the victim, method of unweighting them from their system, etc… This should all be hammered out and drilled on well in advance.
The opposite end of the spectrum is this video, brought to our attention by Eric Ulner of Ropes that Rescue, of a rescue competition which includes pickoffs. These guys are FAST!!! It looks like the video is sped up, but this is just the end product of dozens of hours of disciplined practice.
While real world rescues obviously present situations you are unable to specifically PLAN for, you should always be PREPARED for what might come your way. Rescues don’t need to happen at competition speed, but that’s no excuse for taking an excessive amount of time, either.
This post doesn’t have anything to do with ropes, however, it is a pretty clear example of overcoming your fear of something like heights which in this case happens to be 128,000 feet above the Earth. You better believe that Felix Baumgartener had faith in his training and equipment to step off of his balloon platform and free fall past Mach 1.
I think the parallels for rope work are similar, albeit not usually as extreme. So the next time you get butterflies in your stomach before you go over the edge, remember that you could be staring over your toes 26 MILES down to the ground. Trust your training and your equipment.
Search
Rescue 2 Training Mailing List
Sign up here for our mailing list and receive priority notice of forthcoming training opportunities and other cool stuff.
